10/100M single mode 2 ethernet ports optic fiber media converters
Basic Info
Model No.: 2 RJ-45
Product Description
10/100M single mode 2 ethernet ports
optic fiber media converters
Brief introduction:
This product supports IEEE802.3UI100Base-Tx/Fx protocol, as well as full duplex and half duplex mode. This manual is for this switch. The following purchasing guide is for customers reference.
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter. It features the function of automatically identifying the through line and cross wire
Fiber interface:
SC/ST/FC Optical Fiber interface is of duplex mode type, including two interfaces, namely TX and RX. When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely "TX-RX", "RX-TX" (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch ) with RJ-45 interface is connected to RJ-45 jack of switch through twisted-pair. And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver. Then switch on. The corresponding LED is on for correct connection. Main features:
1. In conformity to IEEE 802.3 10 Base-T standard.In conformity to IEEE 802.3u 100 Base-TX/FX standard.
2. Support 1k MAC address.
3. Back pressure flow control for full duplex IEEE 802.3X and half duplex.
4. Automatic identification of MDI/MDI-X cross line.
5. Support max forwarding packet length 1552/ 1536 bytes option.
6. In conformity to safety code of FCC and 15 CLASS A and CE MARK.
Technical parameters:
1. Standard Protocol: IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
2.Connector: two UTPRJ-45connector,one SC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 1A
5. Environmental temperature: 0-60
6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:8.3/125, 8.7/125, 9/125 or 10/125μm
10 Dimensions:
External power supply: 26mmx 71mm x 94mm
Cautions:
1. This product is suitable for indoor application.
2. Put on the dust cover of fiber interface when not used.
3. It is forbidden to stare at the TX fiber-transfer end with naked eyes.
4. Single optical fiber transceiver must be used in pair
order guide:
duplex fiber multi mode , 10/100M adaptive,SC/ST/FC optic Fiber Connector,2km
single fiber single mode, 10/100M adaptive ,SC/ST/FC optic fiber connector,25-100km
dupex fiber single mode,10/100M adaptive ,SC/ST/FC optic fiber connector,25-100km
Product Categories : Optical Fiber Active Products
Premium Related Products
Other Products
Hot Products
Faraday Rotator Mirror with Fiber Optic PigtailPG-OCPM18 18 channel optical CWDM power meteroptic fiber inspection microscope communication with computer via USBoptical fiber filter cwdm device, FWDM components,1310/14901550nm wavelength2-18channel CWDM mux demux with connectorsdual power supply 19inch rack mounted 16 slots media converter rack2 port small FTTH mini fiber optic terminal box suit for PigtailPG-OPM520 optical power meter,optical fiber testeroptic Fiber StripperOptical fiber connector FC10/100M 7ethernet ports fiber optical media converterPG-FOSC080A Dome Type Fiber Optic Splice ClosureFiber Optic Patch Cord SC,FC,LCPG-FTTH0216B 16 ports ftth outdoor terminal boxPG-FOSC0919 3 inlet 3 outlet horizontal fiber optic splice closure20~80km single mode WDM optical fiber media converters