External 10/100/1000M SFP Port Media Converter

N-net External 10/100/1000M SFP Port Media Converter

In a chip, there are analog and digital signals at the same time, it is easy to produce power synchronization noise, ground bounce and signal crosstalk.

NT-G2100SFP Gigabit Fiber Ethernet Converter is a 3 port media converter With the 2-port redundant mode.10/100/1000M Media Converter provides less than 10ms redundancy of link for highly critical Ethernet applications.

And the higher data rate of the transceiver means that the non-ideal transmission line effect will make wiring more difficult. The copper wires in each layer will produce a "skin effect", and high-frequency signals glide across the surface of the conductor, increasing signal attenuation.

The redundant mode supports auto-recover function. If the destination port of a packet is link-down, Fiber Media Converter Gigabit forwards the packet to the other port of the backup pair.The SFP slot supports single-mode, multi-mode and WDM small-form factory type transceiver modules for various applications. The NT-G2100SFP is with high reliability and flexibility to extend the distance up to 2km, 20km or longer. Fiber Optic To Ethernet Converter depends on the 1000Base-FX SFP transceiver modules. The Ethernet signal that allows two types of segments to connect easily, efficiently and inexpensively.

Ethernet Media Converter Features

1. Complies with IEEE 802.3 10Base-T Ethernet, IEEE802.3 100Base-TX Fast Ethernet, IEEE 802.3ab 1000Base-T Gigabit Ethernet, IEEE 802.3z 1000Base-SX/LX, IEEE 802.3x flow control
2. 2 ports 1000Base-SX/LX SFP Fiber optic, 1 port 10/100/1000Base-T RJ45
3. Auto-Negotiation for 10/100 Base-TX Full-Duplex and 10/100 Base-TX Half-Duplex
4. Support IEEE 802.3x Full-Duplex Flow-Control and Back pressure for Half-Duplex to eliminates packets loss
5. Support Auto MDI/MDI-X function
6. Support VLAN tag, Multicast pass through, and support the max packet length 1522 byte
7. Store-and-Forward mechanism, and 3-port data auto-switching

Gigabit Media Converter Specifications

Parameter	Specifications
Access mode	10/100/1000Mbps Gigabit Ethernet
Standard	IEEE802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX Fast Ethernet, IEEE802.3ab 1000Base-T , IEEE802.3z 1000Base-SX/LX Gigabit Ethernet, IEEE802.3x flow control
Wavelength	Vary on SFP fiber module
Transmission distance	SFP port: Vary on SFP fiber module Category-5 twisted pairs: 100m
Port	One RJ45 port: Connecting with STP/UTP category-5 twisted pairs, EIA568A/B Two SFP port slots: Vary on SFP fiber module
BER	<10-9
MTBF	100,000 hours
Switch mechanism	Store-and-Forward
LED indicator	POWER (power supply), TP Speed (On:1000Mbps,Off:10/100Mbps) TP LINK/ACT , SD1(SFP Port 1 link/act LED), SD2(SFP Port 2 link/act LED)
Power supply	External: AC90~264V/DC100~380V input, 5V 2A output
Power consumption	Max. 5W
Operating temperature	-10~55ºC
Operating humidity	5%~90%
Maintaining temperature	-40~70ºC
Maintaining humidity	5% ~ 90% non-condensing
Dimensions	71mm (W)×94mm (D)×26 mm (H) (external power supply)

Contact us if you need more details on SFP Port Media Converter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Gigabit SFP Fiber Media Converter、External SFP Fiber Media Converter. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Media Converter > Gigabit Media Converter