Installation instructions of the purifier
The optical deodorizing purifier is not an indoor exhaust type, please connect the pipe to outdoor exhaust (high altitude exhaust is recommended). The discharge pipe is recommended to be more than 15 meters long and 6 inches in diameter, and the fan is recommended to be configured with 550W. The longer and thicker the pipe, the slower the wind flow rate, the longer the time for decomposition and transformation, and the better the effect. The discharge outlet of the laser machine is connected to the purification machine, and then the purification machine is connected to the exhaust fan, and then the exhaust fan is connected to the pipe and discharged outside. Check that the joints of the connecting pipes are completely sealed, and the gear setting is reasonable.

Kingsom fume purifying and filtering system is for cleaning of both particles and gases.It's designed to filter the harmful substances, such as hydrocarbon and cyanide, during the process of soldering, tin dipping in the solder pot, laser marking, and carving, printing, beauty salon etc.It catches harmful smoke with freestanding ducts and adjustable air volume to significantly improve your working environment. Our company can also develop customized purifiers according to the special requirements of customers, such as Lab Fume Extractor, Soldering Fume Extractor,Mobile Fume Extractor , Solder Paste Dispenser,High Quality Beauty Salon Air Filter，Portable Smoke Absorber etc.

Applications and Features of this Factory Directly DX-6000 Industrial Air Filter for Laser Soldering Industry

1, Multilayer filtration and rapid purification.

2, It can sabe 43% power compares with other similar products.

3, Mainly for CO2 laser engraving, laser cutting, fiber laser marking, large soldering pot, argon arc welding, ten-station manual soldering.

4, One or two air inlet interface for selection.